Skip to content

Power cords for Jordan

Beta

25 power cords for Jordan: 230 V 50 Hz mains, JSMO Quality Mark / Conformity Certificate required. Country-plug cords for OEM equipment (the local wall plug to IEC 60320), data center jumpers (IEC 60320) and industrial (IEC 60309) cords from our certification records, with the approvals each one carries.

These country pages are in beta. We are still completing the record of plugs, connectors and cords for each country, so more detail and updates are coming soon.

25 of these need no national approval in Jordan.

Power in Jordan

Mains supply
230 V · 50 Hz
Type C/F/G plugs in mixed use.
Wall plug
Plug type not on our record yet — the IEC 60320 jumpers below fit any PDU or power-supply inlet.
Cord ratings
Under the IEC scheme, IEC 60320 C13 / C14 cords are rated 10 A 250 V and C19 / C20 cords 16 A 250 V; a wall-plug cord carries its plug's own rating.
Approvals
Jordan requires JSMO Quality Mark / Conformity Certificate, overseen by JSMO under Standards and Metrology Law No. 22 of 2000.
Regulator: JSMO

Cord-set standard: JS IEC 60320-1; JS IEC 60799. Cordage accepted: H05VV-F, H03VV-F, BS 6500. Labels in Arabic / English.

Industrial power cords for Jordan

IEC 60309 pin-and-sleeve cords, 16–32 A — the international industrial connector, dual-rated for IEC and North American circuits.

Other power cords for Jordan

Extension cords, splitters, hardwired whips and adapter cords approved for use in Jordan.

Not on the record for Jordan yet

  • Country plug cords — The wall plug used in Jordan on one end and the IEC 60320 inlet on your equipment on the other — C13, C15, C5, C7 or C19. The cord an OEM ships in the box with equipment sold into Jordan, and the one an office, lab or shop floor plugs straight into the wall; every cord here carries the approval Jordan requires.
  • Data center cords — IEC 60320 jumpers — a C14 or C20 plug into the PDU, a C13, C15 or C19 connector into the server, switch or storage. For most countries these are our global cords: one part number carries the marks Jordan requires, so a data center operator deploys the same cord in every region.

We list a cord here only when our certification record shows it is approved for use in Jordan or needs no national approval there. Need one of these kinds for Jordan? Ask us — we quote the cord and file the approval.

Questions about power cords for Jordan

What is the mains voltage in Jordan?

230 V at 50 Hz. Under the IEC scheme, IEC 60320 C13 / C14 cords are rated 10 A 250 V and C19 / C20 cords 16 A 250 V; a wall-plug cord carries its plug's own rating.

What approval does a power cord need in Jordan?

Jordan requires JSMO Quality Mark / Conformity Certificate, overseen by JSMO under Standards and Metrology Law No. 22 of 2000. A cord marked "Approved for use in Jordan" on this page carries that approval on our record; "No national approval required" means the record names none for that cord type.

Which cordage types are accepted in Jordan?

H05VV-F, H03VV-F and BS 6500. Our international cords use harmonised H05VV-F / H05RN-F cordage; North American cords use SJT / SJTW.

Also in Middle East & Africa

"Approved for use in Jordan" means the cord carries the approval Jordan requires for its type. "No national approval required in Jordan" means Jordan names no national approval for a cord of that type. Need the certificate behind a cord, or a cord for a country not listed? Ask us.