
Power cords for Kenya
Beta25 power cords for Kenya: the BS 1363 (Type G) plug, 240 V 50 Hz mains, PVoC CoC + KEBS S-Mark for local required. Country-plug cords for OEM equipment (the local wall plug to IEC 60320), data center jumpers (IEC 60320) and industrial (IEC 60309) cords from our certification records, with the approvals each one carries.
These country pages are in beta. We are still completing the record of plugs, connectors and cords for each country, so more detail and updates are coming soon.
Power in Kenya
- Mains supply
- 240 V · 50 Hz
- Type G plugs (UK heritage); major regional hyperscale entry point.
- Wall plug
- BS 1363 (Type G)13 A · 250 V
A fused plug: the BS 1362 fuse inside the plug protects the cord — 13 A on cord sets, 3 A or 5 A on low-current C13 cords.
- Cord ratings
- Under the IEC scheme, IEC 60320 C13 / C14 cords are rated 10 A 250 V and C19 / C20 cords 16 A 250 V; a wall-plug cord carries its plug's own rating.
- Approvals
- Kenya requires PVoC CoC + KEBS S-Mark for local, overseen by KEBS under Standards Act (Cap 496); KEBS PVoC. Every shipment also carries PVoC CoC.
- Regulator: KEBS
Cord-set standard: KS IEC 60320-1; KS IEC 60799; KS 1394 / BS 1363. Cordage accepted: H05VV-F, H03VV-F, BS 6500. Labels in English / SW.
Industrial power cords for Kenya
IEC 60309 pin-and-sleeve cords, 16–32 A — the international industrial connector, dual-rated for IEC and North American circuits.
Made to orderNo national approval required in Kenya
Made to order14 AWG250 voltsULcULRoHSNo national approval required in Kenya
Other power cords for Kenya
Extension cords, splitters, hardwired whips and adapter cords approved for use in Kenya.
Made to orderNo national approval required in Kenya
Not on the record for Kenya yet
- Country plug cords — The wall plug used in Kenya on one end and the IEC 60320 inlet on your equipment on the other — C13, C15, C5, C7 or C19. The cord an OEM ships in the box with equipment sold into Kenya, and the one an office, lab or shop floor plugs straight into the wall; every cord here carries the approval Kenya requires.
- Data center cords — IEC 60320 jumpers — a C14 or C20 plug into the PDU, a C13, C15 or C19 connector into the server, switch or storage. For most countries these are our global cords: one part number carries the marks Kenya requires, so a data center operator deploys the same cord in every region.
We list a cord here only when our certification record shows it is approved for use in Kenya or needs no national approval there. Need one of these kinds for Kenya? Ask us — we quote the cord and file the approval.
Questions about power cords for Kenya
What plug type does Kenya use?
Kenya uses the BS 1363 (Type G) plug. A fused plug: the BS 1362 fuse inside the plug protects the cord — 13 A on cord sets, 3 A or 5 A on low-current C13 cords. Plug ratings: BS 1363 13 A · 250 V.
What is the mains voltage in Kenya?
240 V at 50 Hz. Under the IEC scheme, IEC 60320 C13 / C14 cords are rated 10 A 250 V and C19 / C20 cords 16 A 250 V; a wall-plug cord carries its plug's own rating.
What approval does a power cord need in Kenya?
Kenya requires PVoC CoC + KEBS S-Mark for local, overseen by KEBS under Standards Act (Cap 496); KEBS PVoC. Every shipment also carries PVoC CoC. A cord marked "Approved for use in Kenya" on this page carries that approval on our record; "No national approval required" means the record names none for that cord type.
Which cordage types are accepted in Kenya?
H05VV-F, H03VV-F and BS 6500. Our international cords use harmonised H05VV-F / H05RN-F cordage; North American cords use SJT / SJTW.
Also in Middle East & Africa
"Approved for use in Kenya" means the cord carries the approval Kenya requires for its type. "No national approval required in Kenya" means Kenya names no national approval for a cord of that type. Need the certificate behind a cord, or a cord for a country not listed? Ask us.